[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-17-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu May 1 14:31:33 UTC 2008 (Ubuntu 2.6.24-17.31-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 – 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 – 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 – 000000001ffd3800 (usable)
[ 0.000000] BIOS-e820: 000000001ffd3800 – 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 – 00000000f0007000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0008000 – 00000000f000c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 – 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 – 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 – 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 131027) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 131027
[ 0.000000] HighMem 131027 -> 131027
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 131027
[ 0.000000] On node 0 totalpages: 131027
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 991 pages used for memmap
[ 0.000000] Normal zone: 125940 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00FC9B0 checksum 0
[ 0.000000] ACPI: RSDP 000FC9B0, 0014 (r0 DELL )
[ 0.000000] ACPI: RSDT 1FFD3FD3, 0040 (r1 DELL CPi R 27D5091C ASL 61)
[ 0.000000] ACPI: FACP 1FFD4C00, 0074 (r1 DELL CPi R 27D5091C ASL 61)
[ 0.000000] ACPI: DSDT 1FFD5800, 3107 (r1 INT430 SYSFexxx 1001 MSFT 100000E)
[ 0.000000] ACPI: FACS 1FFE4000, 0040
[ 0.000000] ACPI: APIC 1FFD5400, 0068 (r1 DELL CPi R 27D5091C ASL 47)
[ 0.000000] ACPI: MCFG 1FFD53C0, 003E (r16 DELL CPi R 27D5091C ASL 61)
[ 0.000000] ACPI: BOOT 1FFD4FC0, 0028 (r1 DELL CPi R 27D5091C ASL 61)
[ 0.000000] ACPI: SSDT 1FFD43E6, 02C2 (r1 PmRef Cpu0Ist 3000 INTL 20030522)
[ 0.000000] ACPI: SSDT 1FFD420E, 01D8 (r1 PmRef Cpu0Cst 3001 INTL 20030522)
[ 0.000000] ACPI: SSDT 1FFD4013, 01FB (r1 PmRef CpuPm 3000 INTL 20030522)
[ 0.000000] ACPI: PM-Timer IO Port: 0×1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:13 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 – 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 – 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130004
[ 0.000000] Kernel command line: root=UUID=8c611bec-3527-4af2-8ce2-1d49b1630fc9 ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore… done.
[ 0.000000] Enabling unmasked SIMD FPU exception support… done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 1596.071 MHz processor.
[ 6.562827] Console: colour VGA+ 80×25
[ 6.562832] console [tty0] enabled
[ 6.563065] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 6.563310] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 6.575015] Memory: 507140k/524108k available (2176k kernel code, 16336k reserved, 1007k data, 368k init, 0k highmem)
[ 6.575024] virtual kernel memory layout:
[ 6.575025] fixmap : 0xfff4b000 – 0xfffff000 ( 720 kB)
[ 6.575027] pkmap : 0xff800000 – 0xffc00000 (4096 kB)
[ 6.575028] vmalloc : 0xe0800000 – 0xff7fe000 ( 495 MB)
[ 6.575029] lowmem : 0xc0000000 – 0xdffd3000 ( 511 MB)
[ 6.575031] .init : 0xc0421000 – 0xc047d000 ( 368 kB)
[ 6.575032] .data : 0xc0320134 – 0xc041bdc4 (1007 kB)
[ 6.575033] .text : 0xc0100000 – 0xc0320134 (2176 kB)
[ 6.575037] Checking if this processor honours the WP bit even in supervisor mode… Ok.
[ 6.575079] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 6.655035] Calibrating delay using timer specific routine.. 3195.73 BogoMIPS (lpj=6391471)
[ 6.655063] Security Framework initialized
[ 6.655072] SELinux: Disabled at boot.
[ 6.655088] AppArmor: AppArmor initialized
[ 6.655092] Failure registering capabilities with primary security module.
[ 6.655101] Mount-cache hash table entries: 512
[ 6.655238] Initializing cgroup subsys ns
[ 6.655245] Initializing cgroup subsys cpuacct
[ 6.655255] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 00000000
[ 6.655267] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 6.655270] CPU: L2 cache: 2048K
[ 6.655273] CPU: After all inits, caps: afe9fbff 00100000 00000000 00002040 00000180 00000000 00000000 00000000
[ 6.655283] Compat vDSO mapped to ffffe000.
[ 6.655296] Checking ‘hlt’ instruction… OK.
[ 6.671442] SMP alternatives: switching to UP code
[ 6.673458] Freeing SMP alternatives: 11k freed
[ 6.673572] Early unpacking initramfs… done
[ 7.071289] ACPI: Core revision 20070126
[ 7.071349] ACPI: Looking for DSDT in initramfs… error, file /DSDT.aml not found.
[ 7.075397] CPU0: Intel(R) Pentium(R) M processor 1.60GHz stepping 08
[ 7.075422] Total of 1 processors activated (3195.73 BogoMIPS).
[ 7.075612] ENABLING IO-APIC IRQs
[ 7.075806] ..TIMER: vector=0×31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 7.222589] Brought up 1 CPUs
[ 7.222618] CPU0 attaching sched-domain:
[ 7.222621] domain 0: span 01
[ 7.222623] groups: 01
[ 7.222793] net_namespace: 64 bytes
[ 7.222804] Booting paravirtualized kernel on bare hardware
[ 7.223293] Time: 1:06:12 Date: 05/06/08
[ 7.223320] NET: Registered protocol family 16
[ 7.223519] EISA bus registered
[ 7.223545] ACPI: bus type pci registered
[ 7.261216] PCI: PCI BIOS revision 2.10 entry at 0xfbaae, last bus=10
[ 7.261219] PCI: Using configuration type 1
[ 7.261221] Setting up standard PCI resources
[ 7.266101] ACPI: EC: Look up EC in DSDT
[ 7.270384] ACPI: Interpreter enabled
[ 7.270388] ACPI: (supports S0 S3 S4 S5)
[ 7.270401] ACPI: Using IOAPIC for interrupt routing
[ 7.282780] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 7.283477] Force enabled HPET at base address 0xfed00000
[ 7.283484] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 7.283492] PCI quirk: region 1080-10bf claimed by ICH6 GPIO
[ 7.284128] PCI: Transparent bridge – 0000:00:1e.0
[ 7.284203] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 7.284676] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 7.284768] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 7.292523] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[ 7.292628] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
[ 7.292731] ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
[ 7.292834] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *7 9 10 11)
[ 7.292924] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 7.293017] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 7.293109] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 7.293234] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 7.293265] pnp: PnP ACPI init
[ 7.293272] ACPI: bus type pnp registered
[ 7.307182] pnpacpi: exceeded the max number of mem resources: 12
[ 7.319521] pnp: PnP ACPI: found 11 devices
[ 7.319523] ACPI: ACPI bus type pnp unregistered
[ 7.319527] PnPBIOS: Disabled by ACPI PNP
[ 7.319742] PCI: Using ACPI for IRQ routing
[ 7.319744] PCI: If a device doesn’t work, try “pci=routeirq”. If it helps, post a report
[ 7.362431] NET: Registered protocol family 8
[ 7.362433] NET: Registered protocol family 20
[ 7.362600] hpet clockevent registered
[ 7.362607] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 7.362612] hpet0: 3 64-bit timers, 14318180 Hz
[ 7.363644] AppArmor: AppArmor Filesystem Enabled
[ 7.366420] Time: tsc clocksource has been installed.
[ 7.374449] system 00:00: iomem range 0×0-0×9fbff could not be reserved
[ 7.374452] system 00:00: iomem range 0×9fc00-0×9ffff could not be reserved
[ 7.374456] system 00:00: iomem range 0xc0000-0xcffff could not be reserved
[ 7.374459] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[ 7.374462] system 00:00: iomem range 0×100000-0×1ffd37ff could not be reserved
[ 7.374466] system 00:00: iomem range 0×1ffd3800-0×1fffffff could not be reserved
[ 7.374469] system 00:00: iomem range 0xfeda0000-0xfedfffff could not be reserved
[ 7.374473] system 00:00: iomem range 0xffb00000-0xffffffff could not be reserved
[ 7.374476] system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved
[ 7.374479] system 00:00: iomem range 0xfee00000-0xfee0ffff could not be reserved
[ 7.374483] system 00:00: iomem range 0xfed20000-0xfed9ffff could not be reserved
[ 7.374486] system 00:00: iomem range 0xf0000000-0xf0003fff could not be reserved
[ 7.374493] system 00:02: ioport range 0×4d0-0×4d1 has been reserved
[ 7.374496] system 00:02: ioport range 0×1000-0×1005 has been reserved
[ 7.374499] system 00:02: ioport range 0×1008-0×100f has been reserved
[ 7.374505] system 00:03: ioport range 0xf400-0xf4fe has been reserved
[ 7.374508] system 00:03: ioport range 0×1006-0×1007 has been reserved
[ 7.374511] system 00:03: ioport range 0×100a-0×1059 could not be reserved
[ 7.374514] system 00:03: ioport range 0×1060-0×107f has been reserved
[ 7.374517] system 00:03: ioport range 0×1080-0×10bf has been reserved
[ 7.374520] system 00:03: ioport range 0×10c0-0×10df has been reserved
[ 7.374523] system 00:03: ioport range 0×10e0-0×10ff has been reserved
[ 7.374531] system 00:08: ioport range 0×900-0×90f has been reserved
[ 7.374534] system 00:08: ioport range 0×910-0×91f has been reserved
[ 7.374537] system 00:08: ioport range 0×920-0×92f has been reserved
[ 7.374540] system 00:08: ioport range 0×930-0×93f has been reserved
[ 7.374543] system 00:08: ioport range 0×940-0×97f has been reserved
[ 7.404932] PCI: Bridge: 0000:00:01.0
[ 7.404934] IO window: d000-dfff
[ 7.404938] MEM window: dfd00000-dfefffff
[ 7.404942] PREFETCH window: d0000000-d7ffffff
[ 7.404953] PCI: Bus 4, cardbus bridge: 0000:03:01.0
[ 7.404956] IO window: 00001400-000014ff
[ 7.404960] IO window: 00001800-000018ff
[ 7.404966] PREFETCH window: 30000000-33ffffff
[ 7.404970] MEM window: 34000000-37ffffff
[ 7.404975] PCI: Bridge: 0000:00:1e.0
[ 7.404977] IO window: disabled.
[ 7.404983] MEM window: dfc00000-dfcfffff
[ 7.404987] PREFETCH window: disabled.
[ 7.405005] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 7.405010] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 7.405023] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 7.405040] PCI: Enabling device 0000:03:01.0 (0000 -> 0003)
[ 7.405045] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 17
[ 7.405060] NET: Registered protocol family 2
[ 7.442417] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 7.442615] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 7.442722] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 7.442827] TCP: Hash tables configured (established 16384 bind 16384)
[ 7.442829] TCP reno registered
[ 7.454454] checking if image is initramfs… it is
[ 7.865993] Switched to high resolution mode on CPU 0
[ 8.236746] Freeing initrd memory: 7696k freed
[ 8.236986] Simple Boot Flag at 0×79 set to 0×1
[ 8.237440] audit: initializing netlink socket (disabled)
[ 8.237457] audit(1210035972.556:1): initialized
[ 8.239663] VFS: Disk quotas dquot_6.5.1
[ 8.239747] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 8.239909] io scheduler noop registered
[ 8.239912] io scheduler anticipatory registered
[ 8.239914] io scheduler deadline registered
[ 8.239926] io scheduler cfq registered (default)
[ 8.240029] Boot video device is 0000:01:00.0
[ 8.240144] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 8.240179] assign_interrupt_mode Found MSI capability
[ 8.240211] Allocate Port Service[0000:00:01.0:pcie00]
[ 8.240454] isapnp: Scanning for PnP cards…
[ 8.594359] isapnp: No Plug & Play device found
[ 8.622612] Real Time Clock Driver v1.12ac
[ 8.622744] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 8.623349] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 17 (level, low) -> IRQ 18
[ 8.623360] ACPI: PCI interrupt for device 0000:00:1e.3 disabled
[ 8.624022] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 8.624100] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 8.624200] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0×60,0×64 irq 1,12
[ 8.628926] serio: i8042 KBD port at 0×60,0×64 irq 1
[ 8.628931] serio: i8042 AUX port at 0×60,0×64 irq 12
[ 8.637259] mice: PS/2 mouse device common for all mice
[ 8.637374] EISA: Probing bus 0 at eisa.0
[ 8.637382] Cannot allocate resource for EISA slot 1
[ 8.637410] EISA: Detected 0 cards.
[ 8.637414] cpuidle: using governor ladder
[ 8.637416] cpuidle: using governor menu
[ 8.637516] NET: Registered protocol family 1
[ 8.637546] Using IPI No-Shortcut mode
[ 8.637582] registered taskstats version 1
[ 8.637691] Magic number: 8:609:103
[ 8.637809] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 8.637811] EDD information not available.
[ 8.638044] Freeing unused kernel memory: 368k freed
[ 8.641593] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 9.844555] fuse init (API version 7.9)
[ 9.866648] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
[ 9.866654] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 9.866668] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 9.871410] ACPI: Thermal Zone [THM] (34 C)
[ 10.507156] usbcore: registered new interface driver usbfs
[ 10.507184] usbcore: registered new interface driver hub
[ 10.515624] usbcore: registered new device driver usb
[ 10.531418] USB Universal Host Controller Interface driver v3.0
[ 10.531484] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 10.531498] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 10.531503] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 10.531914] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 10.531950] uhci_hcd 0000:00:1d.0: irq 16, io base 0×0000bf80
[ 10.532095] usb usb1: configuration #1 chosen from 1 choice
[ 10.532121] hub 1-0:1.0: USB hub found
[ 10.532126] hub 1-0:1.0: 2 ports detected
[ 10.635413] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 18
[ 10.635429] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 10.635434] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 10.635459] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 10.635494] uhci_hcd 0000:00:1d.1: irq 18, io base 0×0000bf60
[ 10.635614] usb usb2: configuration #1 chosen from 1 choice
[ 10.635640] hub 2-0:1.0: USB hub found
[ 10.635646] hub 2-0:1.0: 2 ports detected
[ 10.701108] SCSI subsystem initialized
[ 10.733496] libata version 3.00 loaded.
[ 10.739306] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
[ 10.739319] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 10.739325] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 10.739349] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 10.739383] uhci_hcd 0000:00:1d.2: irq 19, io base 0×0000bf40
[ 10.739501] usb usb3: configuration #1 chosen from 1 choice
[ 10.739527] hub 3-0:1.0: USB hub found
[ 10.739534] hub 3-0:1.0: 2 ports detected
[ 10.843205] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 17
[ 10.843219] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 10.843224] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 10.843248] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 10.843283] uhci_hcd 0000:00:1d.3: irq 17, io base 0×0000bf20
[ 10.843398] usb usb4: configuration #1 chosen from 1 choice
[ 10.843423] hub 4-0:1.0: USB hub found
[ 10.843428] hub 4-0:1.0: 2 ports detected
[ 10.947256] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 16
[ 10.947273] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 10.947277] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 10.947304] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 10.951222] ehci_hcd 0000:00:1d.7: debug port 1
[ 10.951229] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 10.951236] ehci_hcd 0000:00:1d.7: irq 16, io mem 0xffa80800
[ 10.978976] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 10.990956] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 10.991095] usb usb5: configuration #1 chosen from 1 choice
[ 10.991121] hub 5-0:1.0: USB hub found
[ 10.991128] hub 5-0:1.0: 8 ports detected
[ 11.096745] ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 19
[ 11.149477] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[dfcfc800-dfcfcfff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 11.160915] ata_piix 0000:00:1f.2: version 2.12
[ 11.160923] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 11.314686] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 18
[ 11.314728] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 11.314894] scsi0 : ata_piix
[ 11.315048] scsi1 : ata_piix
[ 11.315790] ata1: SATA max UDMA/133 cmd 0×1f0 ctl 0×3f6 bmdma 0xbfa0 irq 14
[ 11.315793] ata2: PATA max UDMA/100 cmd 0×170 ctl 0×376 bmdma 0xbfa8 irq 15
[ 11.358626] Clocksource tsc unstable (delta = -5358348760 ns)
[ 11.362598] Time: hpet clocksource has been installed.
[ 11.367843] ata1.00: ATA-6: Hitachi HTS541060G9AT00, MB3OA61A, max UDMA/100
[ 11.367848] ata1.00: 117210240 sectors, multi 8: LBA48
[ 11.367851] ata1.00: applying bridge limits
[ 11.369216] ata1.00: configured for UDMA/100
[ 11.378062] usb 2-1: new full speed USB device using uhci_hcd and address 3
[ 11.382805] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-L532B, DE03, max UDMA/33
[ 11.386139] usb 2-1: configuration #1 chosen from 1 choice
[ 11.429516] ata2.00: configured for UDMA/33
[ 11.429657] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54106 MB3O PQ: 0 ANSI: 5
[ 11.431017] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L532B DE03 PQ: 0 ANSI: 5
[ 11.434065] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 19
[ 11.441887] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
[ 11.441909] b44.c:v2.0
[ 11.443709] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:14:22:dd:ce:51
[ 11.484903] Driver ’sd’ needs updating – please use bus_type methods
[ 11.484991] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
[ 11.485005] sd 0:0:0:0: [sda] Write Protect is off
[ 11.485008] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 11.485025] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[ 11.485073] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
[ 11.485083] sd 0:0:0:0: [sda] Write Protect is off
[ 11.485086] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 11.485102] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[ 11.485106] sda:<4>Driver ’sr’ needs updating – please use bus_type methods
[ 11.492302] sda1 sda2 < sda5 >
[ 11.493379] sd 0:0:0:0: [sda] Attached SCSI disk
[ 11.498935] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 11.498955] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 11.524376] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 11.524382] Uniform CD-ROM driver Revision: 3.20
[ 11.524434] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 11.566119] ieee1394: Host added: ID:BUS[0-00:1023] GUID[474fc0001a807101]
[ 11.587802] Attempting manual resume
[ 11.587806] swsusp: Resume From Partition 8:5
[ 11.587808] PM: Checking swsusp image.
[ 11.587939] PM: Resume from disk failed.
[ 11.601297] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 11.601301] EXT3-fs: write access will be enabled during recovery.
[ 11.698113] kjournald starting. Commit interval 5 seconds
[ 11.698132] EXT3-fs: sda1: orphan cleanup on readonly fs
[ 11.698138] ext3_orphan_cleanup: deleting unreferenced inode 2017755
[ 11.698176] ext3_orphan_cleanup: deleting unreferenced inode 6489249
[ 11.699153] ext3_orphan_cleanup: deleting unreferenced inode 4587539
[ 11.699162] ext3_orphan_cleanup: deleting unreferenced inode 4538375
[ 11.699168] ext3_orphan_cleanup: deleting unreferenced inode 4538374
[ 11.699174] ext3_orphan_cleanup: deleting unreferenced inode 4538373
[ 11.699179] ext3_orphan_cleanup: deleting unreferenced inode 4538372
[ 11.699184] ext3_orphan_cleanup: deleting unreferenced inode 4538370
[ 11.699189] EXT3-fs: sda1: 8 orphan inodes deleted
[ 11.699191] EXT3-fs: recovery complete.
[ 11.702103] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.996662] Linux agpgart interface v0.102
[ 15.064562] intel_rng: FWH not detected
[ 15.128528] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 15.176515] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 15.296417] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 15.695937] iTCO_vendor_support: vendor-support=0
[ 15.748783] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 15.748878] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0×1060)
[ 15.748915] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 16.012270] ACPI: AC Adapter [AC] (on-line)
[ 16.076464] ACPI: Battery Slot [BAT0] (battery absent)
[ 16.239746] input: Lid Switch as /devices/virtual/input/input3
[ 16.240467] ACPI: Lid Switch [LID]
[ 16.240545] input: Power Button (CM) as /devices/virtual/input/input4
[ 16.251379] ACPI: Power Button (CM) [PBTN]
[ 16.251462] input: Sleep Button (CM) as /devices/virtual/input/input5
[ 16.267340] ACPI: Sleep Button (CM) [SBTN]
[ 16.511174] Yenta: CardBus bridge found at 0000:03:01.0 [1028:0188]
[ 16.639779] Yenta: ISA IRQ mask 0×0cb8, PCI irq 17
[ 16.639785] Socket status: 30000006
[ 16.639788] Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07
[ 16.639794] pcmcia: parent PCI bridge Memory window: 0xdfc00000 – 0xdfcfffff
[ 16.670967] sdhci: Secure Digital Host Controller Interface driver
[ 16.670970] sdhci: Copyright(c) Pierre Ossman
[ 16.715121] sdhci: SDHCI controller found at 0000:03:01.2 [1180:0822] (rev 17)
[ 16.715147] ACPI: PCI Interrupt 0000:03:01.2[C] -> GSI 17 (level, low) -> IRQ 18
[ 16.715212] mmc0: SDHCI at 0xdfcfc700 irq 18 DMA
[ 16.831790] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:21/LNXVIDEO:00/input/input6
[ 16.861999] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 16.862644] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input7
[ 16.870740] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
[ 16.870866] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:02/input/input8
[ 16.882729] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
[ 17.992336] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 16 (level, low) -> IRQ 16
[ 17.992365] PCI: Setting latency timer of device 0000:00:1e.2 to 64
[ 18.053585] ieee80211_crypt: registered algorithm ‘NULL’
[ 18.085394] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 18.085399] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 18.150487] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 18.150492] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 18.246329] input: PS/2 Mouse as /devices/virtual/input/input9
[ 18.276860] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input10
[ 18.485390] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 18.816799] intel8×0_measure_ac97_clock: measured 55449 usecs
[ 18.816804] intel8×0: clocking to 48000
[ 18.817664] ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 17 (level, low) -> IRQ 18
[ 18.852766] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 19.146763] Bluetooth: Core ver 2.11
[ 19.148925] NET: Registered protocol family 31
[ 19.148927] Bluetooth: HCI device and connection manager initialized
[ 19.148932] Bluetooth: HCI socket layer initialized
[ 19.165595] Bluetooth: HCI USB driver ver 2.9
[ 19.168616] usbcore: registered new interface driver hci_usb
[ 20.275773] cs: IO port probe 0×100-0×3af: clean.
[ 20.277488] cs: IO port probe 0×3e0-0×4ff: clean.
[ 20.278205] cs: IO port probe 0×820-0×8ff: clean.
[ 20.278802] cs: IO port probe 0xc00-0xcf7: clean.
[ 20.279569] cs: IO port probe 0xa00-0xaff: clean.
[ 20.594126] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
[ 20.697332] lp: driver loaded but no devices found
[ 20.895651] Adding 1510068k swap on /dev/sda5. Priority:-1 extents:1 across:1510068k
[ 54.145695] EXT3 FS on sda1, internal journal
[ 54.207013] device-mapper: uevent: version 1.0.3
[ 54.207047] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
[ 54.722990] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 55.124962] No dock devices found.
[ 55.938117] ppdev: user-space parallel port driver
[ 55.978878] audit(1210036302.794:2): type=1503 operation=”inode_permission” requested_mask=”a::” denied_mask=”a::” name=”/dev/tty” pid=7885 profile=”/usr/sbin/cupsd” namespace=”default”
[ 56.307509] apm: BIOS not found.
[ 112.944959] Marking TSC unstable due to: cpufreq changes.
[ 114.605684] Bluetooth: L2CAP ver 2.9
[ 114.605691] Bluetooth: L2CAP socket layer initialized
[ 114.728533] Bluetooth: RFCOMM socket layer initialized
[ 114.728856] Bluetooth: RFCOMM TTY layer initialized
[ 114.728863] Bluetooth: RFCOMM ver 1.8
[ 57.830352] [drm] Initialized drm 1.1.0 20060810
[ 69.391629] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 69.391639] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 69.391720] [drm] Initialized radeon 1.28.0 20060524 on minor 0
[ 58.036774] NET: Registered protocol family 10
[ 58.037163] lo: Disabled Privacy Extensions
[ 58.038529] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 58.038851] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 116.468418] [drm] Setting GART location based on new memory map
[ 116.469642] [drm] Loading R300 Microcode
[ 116.469690] [drm] writeback test succeeded in 1 usecs
[ 64.412750] NET: Registered protocol family 17
[ 97.087127] ieee80211_crypt: registered algorithm ‘WEP’
[ 129.871373] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 141.687894] eth1: no IPv6 routers present
